It is the process of repairing a home or property to its pre loss condition. Injury to the property could possibly be due to an overflow, flood or some other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. You will find two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage as a result of water guide may be the benchmark tool that’s used by firms that specialize in restoration of water damage.
water damage cleanup Des Moines, IA
Loss Assessment and Categorization
Loss evaluation is the initial and the most important part of water damage restoration. The assessment must be correct so that an appropriate response can be taken. In restorating the damage due to water, technicians and the insurance companies must come together and know what is damaged and how to start restoring the damage. Identifying the source of the damage, documentation of damage, and accurate estimates are mandatory for a suitable water damage restoration. Categorization is based on the contamination degrees of the water source. The categories are listed below
Category 1 – That is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – That is water that’s some contaminants like water from a dishwasher, automatic washer or toilet with urine.
Category 3 – That is water that’s highly unsanitary and is effective at causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.
Decontamination and Drying
Following the evaluation is complete, the process of drying and decontaminating begins at the site. Based on the extent of damage, damage caused as a result of water can be classified into 4 types. Class 1 Damage- When loss is restricted to a small area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – Once the damage is always to the entire room and carpet area. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are lots of deep saturation pockets. Decontamination and drying is just a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination must be done if contamination has been detected in the area. Decontamination may be done for the whole area or in specific pockets where contamination has been detected.